1、精心处置各种升降货梯http://m.iyunsun.com/衬垫。如机油盘或气门罩盖，由于接触面积大，不易压实，容易造成升降货梯漏油。按修理规范拧紧升降货梯各螺母，过松压不紧升降货梯衬垫会渗油，过紧会使升降货梯螺孔周围金属凸起或将丝扣拧滑引起漏油。
Carefully dispose of all kinds of cargo lifter pad. Such as the oil pan or valve cover, due to the large contact area, easy compaction, cargo lifter likely to cause oil spills. Press repair specifications tighten each nut cargo lifter,pressure is not too loose tight liner cargo lifter will permeability, tight cargo lifter will screw around screwing the threaded metal bumps or slippery causing oil spills.

2、及时更换升降货梯失效油封，油封安装不妥，轴颈与油封刃口不同心，极易因偏摆而甩油；有些经长期使用后，会因橡胶老化而失去弹性、密封唇口损坏开裂或自紧弹簧失效，均会丧失封油作用，应按标准修复或更换合格升降货梯配件。
The timely replacement of cargo lifter failure seals, oil seals improper installation, journal and seal edge misalignment, yaw and rejection vulnerable to oil; after some long-term use, due to loss of elasticity of rubber aging, cracking or damage to the sealing lip self-tightening spring failure, will lose the role of seal oil, should be qualified to repair or replace the standard cargo lifter accessories.

3、及时更换升降货梯磨损严重的机件，当主轴承与轴颈配合间隙过大时，前后油封会因曲轴冲击作用而失去密封性，造成机油从曲轴头部外漏，或向离合器内渗油，从而污染摩擦片导致打滑，升降货梯工作失效。
The timely replacement of cargo lifter badly worn parts, when the main bearing and journal with the gap is too large, the front and rear crankshaft seal due to the impact of the loss of the role of tightness, causing oil leakage from the crankshaft of the head, or into the clutches permeability, thereby pollution lead slip friction plate, cargo lifter fails to work.

升降货梯：http://m.iyunsun.com/